Up Woodworking Index » Barrister » Details Prev Next Slideshow

Previous image Next image Index page
IMG_0563
IMG_0568
IMG_0725
IMG_0727
IMG_0732
  IMG_7347.JPG - The glass sits in a 3/8 wide x 1/2 deep (or so) rabbit on the back side of the door. I then used my 23ga pin-nailer to tack 3/8 x 3/8 (no glue) retainer strips in. I did not miter the corners of the retaining strips. Should the glass need to be replaced, butt joints should make it easier to remove the retainers.  
IMG_7339
 
 
 
 

The glass sits in a 3/8 wide x 1/2 deep (or so) rabbit on the back side of the door. I then used my 23ga pin-nailer to tack 3/8 x 3/8 (no glue) retainer strips in. I did not miter the corners of the retaining strips. Should the glass need to be replaced, butt joints should make it easier to remove the retainers. | IMG_7347.JPG | 4/3/12 1:45 PM
Date: 4/3/12 1:45 PM
Total images: 20 | Help